TECHNICAL CHARACTERISTICS OF OPERATION AND FILTERING SYSTEM

The purification is done in two stages subsequent posts vertically:

SEDIMENTATION ROOM WITH SEPARATOR
The drop separator, consisting of a series of specially shaped fins to multiple folds, aims to separate, as first, the oil collected by air. This oil is collected in an underlying discharge hopper.

FIRST STAGE: PREFILTRATION
At this stage, which aims to stop larger particles, and avoid the overhead of the second stage, it has a metallic cell with galvanized frame, which contains, as a filtrating media, an extra thick net on alternating layers.

SECOND STAGE: FILTRATION WITH CARTRIDGE
The cartridges, which are designed by us and built for the purpose, consist of a special external sheath allowing the cartridge to drain the liquid collected, and prevent this enters into the flow of clean air, thanks to a highly effective filtration for the lifetime of the filter.

Dimensions: Ø 560xh635
Capacity: 3.000mc/h
Filter surface: 33 mq

THE SUCTION FILTER IS ESSENTIALLY CONSTITUTED:

• structure in sturdy sheet thickness should
• routine maintenance doors, through which you can quickly remove the filter cartridges for
• cleaning and/or periodic replacement of filter SEPTA
• crankcase with sleeves of discharge of oil received
• sedimentation room with drop separator metallic
• first stage: prefiltration
• second stage: filtrationdi scarico dell’olio captato

OPTIONAL ACCESSORIES:

• centrifugal fan installed on the ground or directly on the roof
• ciclonated preseparator for large amounts of liquid
• silencers on chimneys
• cut fire damper, for insulation of machinery in the presence of flame
• differential pressure meter